Only Original Parts will keep your machine a Kverneland

Stronger than ever

Kverneland’s XHD plough parts are designed with the most extreme conditions in mind. Abrasive soils put significant stresses on earth wearing parts, resulting in fast wear and regular parts replacement. Thus increasing both costs and downtime. 

The Kverneland XHD Carbide range is the ideal solution that makes light of tough and demanding conditions. Especially suited to large farms and contractors, the new XHD range has a lifetime up to 8 to 10 times the life* of the standard parts, keeping costs and downtime to a minimum. A cost effective alternative to handle the toughest conditions. 

*Based on average test conditions. Depending on soil type, moisture content, machine type, working speed, working depth, machine width and mounting position


Tungsten Carbide

Tungsten Carbide is one of the hardest materials known to man. Combining Carburised Tungsten Powder with Soft Cobalt produces a long lasting, hard and durable material able to withstand extreme impacts.

A Premium Grade of Tungsten Carbide tiles are applied to Kverneland XHD parts to protect key areas against breakage and fast wearing.

The function of each XHD part is different and as such, each experiences different stress levels and impacts. To achieve an acceptable balance between long life verses cost, whilst retaining its high wear characteristics and resistance to impacts - each part has a unique balance between hardness and flexibility.

Heat treated Kverneland Steel

Many reinforced Non Genuine parts are not heat treated, but rely solely on the Tungsten Carbide protected areas. In Kverneland, we understand the importance of balancing the correct heat and hardness and apply the same tried and proved methods to all our XHD parts.

To allow a frictionless flow of soil, our unique heat treatment produces a harder and smoother surface that lasts longer than softer, untreated steel. The ideal combination of Tungsten Carbide tiles on heat-treated steel gives you the best weapon to face the most extreme soil conditions.  


Corner Tiles make the difference 

The traditional method of reinforcing steel parts is to apply flat tungsten carbide tiles to the surface of the cutting edge. However, these only protect the surface - not the cutting edge.

All cutting edges of the Kverneland XHD range are equipped with Corner Tiles. These specially designed tiles wrap around the leading edge, protecting both the surface and edge from wear and damage. The result is a sharper, long lasting edge – that remains resistant to shocks and breakages from hard impacts.  

  1. Additional protection to steel body 
  2. Extremely shock resistant 
  3. Avoids wearing the steel point 

XHD CARBIDE PLOUGH PARTS


XHD POINT

The XHD Plough Point is protected with 16 Premium Grade Tungsten Carbide tiles. Four specially designed Corner Tiles are located along the leading edge and retain their shape and strength to give maximum protection against hard impacts and abrasive soils. In addition, the four rows of tiles on the surface and those on the outer edge protect these zones from stony and abrasive conditions whilst ensuring an uninterrupted flow of soil. The overall shape of the XHD point is designed to penetrate the soil with the greatest of ease, even in the driest and hardest soil conditions.  

XHD CARBIDE POINT
KK089171R - Left
KK089170R – Right


XHD Shares

The XHD Plough Share is protected with 16 Premium Grade Tungsten Carbide Corner Tiles. Located along the full leading edge of the share, the tiles retain their shape and strength to give maximum protection against hard impacts and abrasive soils. The share is designed to be a seamless link between the point and mouldboard to ensure a smooth flow of soil over the whole plough body with minimum friction, resulting in longer lifetime.  

XHD CARBIDE 16’ SHARE
KK089155R - Left
KK089154R - Right 




XHD Landsides

The XHD Landside is protected with 8 (Short Landside) and 10 (Long Landside) Premium Grade Tungsten Carbide tiles, that retain their shape and strength to give maximum protection against hard impacts and abrasive soils.  Divided into 5 (Short Landside) and 7 (Long Landside) evenly spaced columns, all tiles are countersunk and specially Angled to give the landside maximum protection against the most abrasive conditions. 

XHD CARBIDE LANDSIDE SHORT
A1520015 - Left
A1520014 - Right

 XHD CARBIDE LANDSIDE LONG
A1520017 - Left
A1520016 - Right


XHD Skimmer Shares

The XHD Skimmer share is protected with both Tungsten Carbide tiles and PTA (Plasma Transferred Arc) hard facing. Located on the horizontal cutting edge, the 11 specially designed Premium Grade Tungsten Carbide Corner Tiles retain their shape and strength to give maximum protection against hard impacts and abrasive soils. In addition, a strip of PTA to the vertical edge gives added protection against aggressive conditions. 

XHD CARBIDE SKIMMER SHARE
A133949530 - Left
A133949430 - Right


XHD Shin Pieces

The XHD Shin piece is protected with 11 Premium Grade Tungsten Carbide Corner Tiles that retain their shape and strength to give maximum protection against hard impacts and abrasive soils. Located on vertical leading edge the tiles retain their shape and strength to give maximum protection against hard impacts and abrasive soils, whilst ensuring an even flow of soil and protection to the base of the mouldboard. 

XHD CARBIDE SHIN PIECE
A133939530 - Left
A133939430 - Right

DISTRIBUTION CENTRE METZ - SERVICE 24/7

 
Time is money, and we know the importance of receiving the right parts at the right time! Your Kverneland dealer is supported by a massive distribution network to supply you with exactly what you need, when you need it.

Our main distribution centre Metz warehouse is located in Thionville, France. A strategic location for distributing parts to all corners of the world. With over 70.000 parts in stock and 24/7 service, we are ready to supply you with parts – at any time!